Screening Trommel Machine
A. SCREEN MACHINE
| Capacity | 2 TPH | ||||
| Material to be Screened | Compost (Converted from Garbage) | ||||
| Overall Dimensions |
|
||||
| Material Of Construction | 1.6 mm Thk Screen with Ø 4 mm perforation | ||||
| Reinforcement Section | 10 mm thk Flat rings and 5 mm thk end shells | ||||
| Drive | 3.00 HP Geared Motor of desired O/P RPM | ||||
| Supporting Structure | Fabricated from Channel 125 X 65 | ||||
| Electrical Control | Consisted with fuse less protection, With emergency switch and VFD for the setting of the desired RPM for the screen | ||||
| Finishing and painting | Entire machine exposed surface is ground and to be painted with enamel paint of customer desired shade. |
B. BELT CONVEYOR
| Capacity | 2 TPH |
| Type | Three Equal roll trough belt Conveyor |
| Material to be handled | Compost (Converted from Garbage) |
| Center / Centre Length | 9.5 Mtr. |
| Belt Width | 600 mm |
| Conveyor frame | Channel 100 X 50 |
| Drive / Tail Drum | Ø320 mm with 050 mm shaft at bearing step |
| Carrying / Return Idler | Ø76 mm with Bearings & Seal at both sides |
| Drive all equipment | 3.00 HP Geared Motor of desired O/P RPM |
| Supporting Structure | Fabricated from Channel 100 X 50 |
| Take up | Screw type take up for bell tightening |
| Electrical Control | Consisted with fuse less protection, With an emergency switch |
| Finishing and painting | Entire machine exposed surface is ground and to be painted with enamel paint of customer desired shade. |
